AMC306 – Microset User manual EN © Elmarc, 14/04
Table of contents 1 Intended use 3 2 Safety 4 2.1 Labels in this manual 4 2.2 General safety instructions 4 3 Functions 3.1 Remote control 3.2 AMC306 Microset 4 4.1 4.2 4.3 4.4 Operation CD functions Radio functions USB functions LINE-IN 5 5 6 7 7 10 11 13 5 Cleaning and maintenance 5.
1 Intended use The Microset plays music from CDs and USB. Music can also be played via the LINE-IN port. The FM function lets you listen to the radio. Read the manual with care before the first use. 55 A number of functions are not described in this manual. Please read the quick start guide that comes with the product. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
2 Safety 2.1 Labels in this manual 66 WARNING A warning means that injury or death is possible if the instructions are not obeyed. 11 CAUTION A caution means that damage to the equipment is possible. 55 A note gives additional information, e.g. for a procedure. 2.2 General safety instructions 66 WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. 66 WARNING Do not insert any objects in the ventilation holes. 66 WARNING This appliance employs a laser system.
3 Functions 3.1 Remote control 1 15 2 3 5 7 9 11 13 4 16 6 18 8 19 10 21 12 23 14 25 17 20 22 24 1. STANDBY button 2. Digit buttons 3. PROGRAM button 4. ALB - button 5. VOLUME button + 6. FAST REWIND / PREVIOUS button 7. VOLUME button 8. TUNER - button 9. CD button 10. USB button 11. INTRO button 12. REPEAT button 13. Sleep timer button 14. Equaliser button 15. MUTE button 16. ALB + button 17. PLAY/PAUSE button 18. FAST FORWARD / NEXT button 19. TUNER + button 20. FM button 21.
• To stop playback, press the AUTO/STOP button (22). • To select the source mode , press the SOURCE button (20). • To switch between Mono and Stereo reception, press the ST/MONO button (24). Sleep timer • Press the button SLEEP (13) repeatedly until the desired setting is found. The SLEEP indicator is ON. Using the EQ function Select from the various sound effects • Press the button EQ (14) repeatedly until the desired setting is found. 3.2 AMC306 Microset 1 2 6 1. 2. 3. 4. 5. 6. 7. 8. 9.
4 Operation 4.1 CD functions 1 Preparation • Press the CD compartment (1) to open the appliance • Insert the CD with the label upwards • Close the CD compartment (1) 2 3 4 16 6 18 17 20 11 12 22 • Press the SOURCE button (20) to select the CD mode. During playback, the following functions are available: • To start playback, press the PLAY/PAUSE button (17) once. • To pause playback, press the PLAY/PAUSE button ((17)) once; to resume playback, press the button again.
• To search for a specific point on the disc, hold the PREV button (6) or the NEXT button (18) until the point is reached and release the button. • Press the digit buttons (2) to select a desired track. • To stop playback, press the AUTO/STOP button (22). 55 Please note: • Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data. • If a disc contains mixed content (e.g. MP3 and video files), the appliance will only recognise, list and play one content type.
REPEAT ALL appears on the display. • Press the button once again to cancel the function. Using the RANDOM function • Press the button 1 times to play all tracks in random order. The repeat function is now off. RANDOM appears on the display. • Press the button once again to cancel the function. Using the ALB+/- function For audio discs (MP3/WMA) • Press the ALB- (4) button or the ALB+ (16) button to select the desired folder.
4.2 Radio functions 2 3 4 16 6 18 17 20 11 12 22 • Press the SOURCE key (20) to select the radio mode. TUNER appears on the display. • To switch between Mono and Stereo reception, press the ST/MONO button (24). Automatically adjust the frequency • To search for frequencies automatically, press the AUTO/STOP button (22). • Press the button once again to cancel the function. • To select a preset station, press the digit buttons (2).
4.3 USB functions 8 • Insert the USB device in the slot (8). The device can only be connected one way. 6 18 17 20 12 22 • Press the SOURCE button (20) to select the USB mode. USB appears on the display. The display shows the total number of tracks. During playback, the following functions are available: • Press the PREV button (6) or the NEXT button (18) to select a folder or a file. • Press PLAY/PAUSE (17) to confirm.
• Press the button 2 times to repeat all the numbers within the album. • Press the button 3 times to repeat all chapters or tracks. • To cancel the function, press the REPEAT (12) button again. The appliance will resume the normal playback. • To remove the device, gently pull it out of the slot.
4.4 LINE-IN 6 18 17 20 22 • Connect the external appliance to your AMC306 Micro System. • To select the source mode LINE-IN, press the SOURCE button (20). LINE-IN appears on the display. During playback, the following functions are available: • To select a track, press the PREV button (6) or the NEXT button (18) until the desired track is set. • To start playback, press the PLAY/PAUSE button (17) once.
5 Cleaning and maintenance 66 WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. • Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. • Put the appliance on a horizontal flat surface. • When the appliance is not in use for longer period, we recommend switching the appliance off at the master power switch. 5.1 Handle and care of a disc • Hold the disc with fingers.
6 Disposal of used electric and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
7 Technical data General • LCD Display • Voltage: 100 - 240VAC ~ 50/60 Hz • Power consumption: 10W • Standby power consumption: <0,5W • Frequency response: +/- 3 dB (20Hz ~20KHz) • Speaker output: 2 x 2,5W RMS • Impedance: 8Ω 3W • Dimensions: • Weight: Disc output • Frequency range: 20Hz ~20KHz • Dynamic range: ≥ 70dB • Signal/noise ratio: > 80dB Remote control • Battery size: 2 x AA • Dimensions: • Weight: Radio • Frequency range: 87,5~108 MHz Supported media formats • Disc types: CD/CD-R/CD-RW • Audio for