Operating instructions

REMOTE CONTROL- OPERATING INSTRUCTION
11
8. Press AUTO key, unit will automatically scan input signals. It will scan in the order of AUX, CD/VCD, DVD,
AC-3 and TUNER. After detected one channel had signal input, it will stop scanning and output the signals.
Press AUTO key again to start scanning from next channel. If no signal is detected in AUX, CD/VCD, DVD,
AC-3 channels, it will switch to TUNER.
9. Press MUTE key on the remote control to mute, press it again to unmute. Or press any keys on the front panel to
unmute.
TWINKLE
10. Press STANDBY key on the remote control to make it standby. Press it again the indicator will light down and
enter normal status.
TUNE
DISPLAY
CH DSP
AUTOINPUT
STANDBY
TUNE
DISPLA Y
CH DSP
AUTOINPUT
STANDBY
VOL
VOL
MUTE
BAL
L
BAL
R
STANDBY
INPUT
POWER
TWINKLE