APD710T Manual Index o o o o o o o o o o o o o 1. Intended use 2. Safety 2.1. Labels in this manual 2.2. General safety instructions 3. Preparations for use 3.1. Unpacking 3.2. Package contents 4. Installation 4.1. Connections 4.2. Change the battery 5. Functions 5.1. Remote control 5.2. APD710T Portable DVD 6. Operation 6.1. Turning the device on and off. 6.2. General setup menu operation 6.3. DVD/CD functions 6.4. USB functions 7. Cleaning and maintenance 7.1.
1.Intended use The appliance functions as a portable media player that can be mounted in the car. The appliance consists of two main units that have to be connected. This appliance lets you open music files (MP3/WMA), video files (MPEG-4) and photo files (JPEG). These files can be accessed via DVD, CD and USB. Read the manual carefully before the first use.
2.Safety 2.1. Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure. 2.2. General safety instructions This appliance employs a laser system. To prevent direct exposure to the laser beam, do not open the appliance. Visible laser radiation when open and interlock defeated. WARNING Do not put force on the appliance.
3.Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
4.Installation 4.1. Connections Link the screens For the power supply, the system must be connected to the car through the 12V Auto adapter. To connect a headphone, insert the cable plug in the headphone jack. To prevent hearing damage, remember to adjust the volume to a comfortable level.
4.2. Change the battery Remote control Pull out the battery holder Insert 1 lithium battery, type CR2025 3V battery When inserting the battery observe the (+) and (-) polarity markings. Insert the battery tray into the remote control.
5.Functions 5.1. Remote control 1. SEARCH button 2. ZOOM button 3. Digit buttons 4. ANGLE button 5. SUBTITLE button 6. TITLE button 7. ENTER button 8. Arrow buttons 9. SETUP button 10. AB button 11. REPEAT button 12. PROGRAM button 13. DISPLAY button 14. MUTE button 15. SOURCE button 16. STEP button 17. AUDIO button 18. MENU button 19. STOP button 20. PLAY/PAUSE button 21. RETURN button 22. VOLUME +/- button 23. REVERSE SKIP/FORWARD SKIP button 24.
5.2. APD710T Portable DVD 5.3. APD710T Portable DVD 1. On/Off navigation button 2. USB 2.0 slot 3. Headphone jack 4. AV Out 5. DC Out 6. DC IN 9-12V 7. AV IN 8. SETUP button 9. UP / PREVIOUS button 10. DOWN / NEXT button 11. ENTER button 12. VOLUME - button 13. VOLUME + button 14. SOURCE button 15. MUTE button 16. UP button 17. DOWN button 18. MODE button 19. LEFT / VOLUME - button 20. RIGHT / VOLUME + button 21.
6.Operation 6.1. Turning the device on and off. Set the switch in the ON position to turn the equipment on. Set the switch in the OFF position to switch off the device. 6.2. General setup menu operation This chapter explains a complete setup of the appliance: settings of screen display, audio setup and video setup.
The following actions have to be carried out with the remote control. Press the SETUP button (9). Press the arrow buttons (left and right) (8) to select a menu. The submenu is displayed directly. Press the arrow buttons (up and down) (8) to scroll through the submenu. Press the ENTER button (7) to select a setting, or the left arrow button to cancel the selection. Press the SETUP (9) button to store the settings and exit.
LANGUAGE SETUP In the OSD LANG section, press the arrow buttons to choose the language. In the AUDIO LANG section, choose the audio language. In the SUBTITLE LANG section, choose the subtitle language. STANDBY SETTINGS Set STANDBY SETTINGS after how many hours of inactivity your APD710T is automatically placed on standby mode Choose from 3 hours, 4 hours or never (OFF) VIDEO SETUP BRIGHTNESS: Adjust the screen brightness. CONTRAST: Adjust the contrast of the image.
During playback, the following functions are available: To select a chapter (DVD) or track (CD), press the digit buttons (3). In order to select a track 10 or greater, first press the 10+ button. For example: select track 12, first press 10+, and then press number 2 button. To pause playback, press the PLAY/PAUSE button (20) once; to resume playback, press the button again. To stop playback temporarily, press the STOP button (19) once.
Using the PROGRAM function With the PROGRAM (12) function favourite tracks from the disks can be stored. 1. Press the PROGRAM button (12) to enter the PROGRAM function. 2. Press the digit buttons (8) to select a desired track, and use the arrow button down to highlight the next entry. 3. Press the PROGRAM (12) button and select CLEAR in the menu to resume playback. 4. To view JPEG images you can press the PROGRAM button (12) repeatedly to go to slide show mode.
6.4. USB functions Insert the USB device in the slot . The device can only be connected one way. After the device has been connected, a content menu will display on the screen. Press the arrow button (8) (up and down) to select a folder or a file. Press the ENTER button (7) to enter the selected folder or file. You can also use the digit buttons (3) to select a folder or to play the file. Press the MENU button (18) to return to the content menu during playback.
7.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 7.1. Handle and care of a disc Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. Do not bend or press the disc.
8.Technical data APD710T Portable DVD Voltage: 12 VDC Power consumption: 15W Frequency response: 20Hz ~20KHz (1dB) Speaker output: 2 x 1 Watt Appliance features 16:9 aspect ratio with 17.8 cm screen (7") USB 2.
9.Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
