Operation Manual

The following actions have to be carried out with the remote control.
 Press the SETUP button (9).
 Press the arrow buttons (left and right) (8) to select a menu. The submenu is displayed
directly.
 Press the arrow buttons (up and down) (8) to scroll through the submenu.
 Press the ENTER button (7) to select a setting, or the left arrow button to cancel the
selection.
 Press the SETUP (9) button to store the settings and exit.
SYSTEM SETUP
The options TV SYSTEM and TV TYPE are only applicable if the APD710T is connected to
an external screen
TV SYSTEM
 Select the video output format to match the appliance to the TV system: PAL, AUTO or
NTSC.
Please note: if the wrong option has been selected, this may result in very poor image
quality. In that case, select a different setting.
TV TYPE
 In the TV TYPE section, press the arrow buttons (8) to select 4:3 4:3 PANSCAN or 4:3
LETTERBOX for a conventional TV set. Select 16:9 for a wide screen TV set.
PASSWORD
 Change the default password. Enter the current password in the first box. Enter the new
password in the second box. Enter the new password again in the third box to confirm.
The default password (0000) is always active. Even if the password has been reset.
RATING
Set a rating for movies played by the appliance. Movies rated higher than the level set for the
parental lock can not be viewed.
DEFAULT
Restore the default settings of the appliance.