Operation Manual

7.Cleaning and maintenance
WARNING Before performing any cleaning or maintenance, switch off and unplug the
appliance.
Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen
the cloth slightly with water and a neutral solution.
7.1. Handle and care of a disc
 Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do
not touch the disc surface.
 Do not bend or press the disc. Do not expose the disc to direct sunlight or heating
sources.
 Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently,
radially, from centre towards the outer edge.
 Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning
fluids will permanently damage the disc surface.