Operation Manual

10
Using the PROGRAM function
To use the PROGRAM function for CD/MP3 CD, the playback must be in
STOP mode.
● To program a CD:
Press the STOP button (9), then press the PLAY MODE button (11).•
Press the PREV button (7) or the NEXT button (8) to select a desired •
track. Press the PLAY MODE button (11) to conrm the selection.
Repeat the previous step to select more tracks and conrm every •
selection with the PLAY MODE button (11).
● To program an MP3 CD:
Press the STOP button (9), then press the PLAY MODE button (11).•
Press the FOLDER button (6) to select a folder or a le.•
Press the PREV button (7) or the NEXT button (8) to select a track. •
Repeat the previous step to select more tracks and conrm every
selection with the PLAY MODE button (11).
● Press the PLAY/PAUSE button (10) to start the program.
● To play the program again, press the PLAY MODE button (11) after the
program has nished. Press the PLAY/PAUSE button (10) to start the
program again.
● To view the program during playback, press the PREV button (7) or the
NEXT button (8).
● To stop the program during playback, press the STOP button (9).
● To delete the program during playback, press the STOP button (9) twice.
USB functions5.5
● Switch on the appliance.
● Move the FUNCTION switch (3) to the position CD/USB.
● If the appliance is in CD mode, press the CD~USB button (10) to select
the USB mode.
● Insert the device in the slot (14). The device can only be connected one
way. After the device has been connected, a content menu will display on
the TV screen.
● To start playback, press the PLAY/PAUSE button (10) once.
During playback, the following functions are available:
● To select a track, press the PREV button (7) or the NEXT button (8) until
the desired track is set.
● To pause playback, press the PLAY/PAUSE button (10). To resume
playback, press the PLAY/PAUSE button (10) again.