Operation Manual
Alarm
Your digital photo frame has an internal clock that allows you to set a musical
alarm. In order to do so, you should first set the clocl as indicated in the
previous paragraph.
Then go to the Setup menu and select Custom / Power On Enable.
Press the
key and then the
key to select On.
Press OK to activate the alarm call.
Press
- Go to the Setup menu and select
Custom / Set time.
- Press the
key to select Power On.
- Press ENTER to display the setting
for the activation of the alarm call.
- Use the
and keys to adjust the
time for your alarm.
- Then press the
key to select the
minutes that you can then adjus
t
using the and arrow.
- When the time for your alarm is set,
press the ENTER key to validate.
ALARM CLOCK
Go to SETUP menu and select
CUSTOM / Alarm Enable.
Press
to On or Off the alarm.
Go to SETUP menu and select
CUSTOM / Alarm Time.
Press to set the alarm time.
When the alarm is activated, a ring
Sound will occur.
To stop the alarm completely, press ENTER on both frame of remote control.
To snooze the alarm, press MENU, keys on the front panel of the
frame, or any other keys on the remote control. The alarm is then on standby
for 5 minutes.
to put the digital photo frame on standby.
33