Operation Manual

D - Settings
The weather station has 3 display modes : Time, Clock and Calendar. To go
from one mode to another, use the MODE key.
The Time mode is the default mode. When you access the Clock or Calenda
r
modes, if no action is carried out during 20 seconds, then the weather station
will go back to the Time.
a. Clock Mode
With this mode, the double points in between hours and minutes will flash.
You can modify the following parameters :
Time Format Display :
- Press the SET key for 2 seconds to access the time format display (12 hours or 24
hours).
- Then press the ADJ key to select the correct parameter.
- Once the setting has been made, press the MODE key to exit the settings menu.
Setting the time :
- Press the SET key for 2 seconds to access the time format display (12 hours or 24
hours).
- Then briefly press the SET key to access the clock settings.
- Adjust the time using the ADJ key.
- Press the SET key briefly again to select the minutes settings.
- Set the minutes using the ADJ key.
- Once the settings have been entered, press the MODE key to exit the settings
menu.
Temperature and humidity records :
- Briefly press the ADJ key to view the maximum temperature and humidity.
- Briefly press the ADJ key a second time to view the minimum temperature and
humidity.
- Briefly press the ADJ key a third time to display again the current temperature and
humidity rate.
Resetting the temperature and humidity records :
- Press the ADJ key for 2 seconds.
- The beeping sound means that the minimum and maximum temperature and
humidity have been adjusted based on current values.
Temperature Unit :
- Briefly press the SET key to go from Celsius to Fahrenheit.
35