Operation Manual

b. Alarm Mode
Press the MODE key twice to access the Alarm mode. In this second mode, you
can modify the following parameters.
In this mode, the double points between the hours and minutes will not flash, and
ALM is displayed in the day of the week box.
Setting the alarm time:
- Press the SET key for 2 seconds to access the setting for the alarm time.
- Set the time using the ADJ key.
- Press again the SET briefly to select the minutes setting.
- Set the minutes with the ADJ key.
- Once the settings have been entered, press the MODE key to exit the settings
menu.
Activating the alarm and bell :
- Press repetitively the ADJ key to activate one of the following modes (in
order):
- Activated clock, deactivated bell.
- Deactivated alarm, activated bell.
- Activated alarm, activated bell.
- Activated alarm, activated bell.
- When the bell is activated, a beeping sound will occur on the hour every hour.
- To snooze the alarm bell, press the SNOOZE key. The bell is then on
standby for 5 minutes.
To stop the alarm bell completely, press the MODE key.
c. Calendar Mode Press the MODE key three times to access the Calendar
mode. In this third mode, you can modify the following parameters.
In this mode, the year is displayed instead of the time.
- Press the SET key for 2 seconds to access the year settings.
- Set the year using the ADJ key.
- Briefly press the SET key again to select the month settings.
- Set the month using the ADJ key.
- Briefly press the SET key again to select the day settings.
- Set the day using the ADJ key.
- Once the settings have been entered, press the MODE key to exit the settings
menu.
36