User manual

14
● Press the MEM/SET button (31) to conrm. The minute digits start ashing.
● Press the PREV button (32) or the NEXT button (33) to set the desired
minutes.
● Press the MEM/SET button (31) to conrm.
Setting the alarm time
The alarm time can only be set in standby mode. Two time slots are
available (ALARM1 and ALARM2).
To set ALARM1:
● Press and hold the AL1 button (50). The AL1 indicator (23) appears on the
display. The hour digits start ashing.
● To set the correct hour, press the PREV button (32) or the NEXT button (33).
● To conrm the setting, press the AL1 button (50). The minute digits start
ashing.
● To set the correct minutes, press the PREV button (32) or the NEXT
button (33).
● To conrm the setting, press the AL1 button (50).
To set ALARM2:
● Press and hold the AL2 button (49). The AL2 indicator (24) appears on the
display. The hour digits start ashing.
● To set the correct hour, press the PREV button (32) or the NEXT button (33).
● To conrm the setting, press the AL2 button (49). The minute digits start
ashing.
● To set the correct minutes, press the PREV button (32) or the NEXT
button (33).
● To conrm the setting, press the AL2 button (49).
i
During a power failure, or when unplugging the appliance, the time
settings are lost, unless backup batteries are installed.