Operation Manual

Times must be entered in CLOCK to operate the TIME feature
Turn on this function to use TIME feature
To turn the television on at selected time.
To turn the television off at selected time.
To turn the awoke function on/off
AWTIMR---Set the awake time that you want .If you set the AWTIME is
12:00, The ¡®CATCH TIME11:58:00¡¯will display on the screen for
awaking you. It will disappear from the screen until ¡®CATCH TIME
12:00:00¡¯.
TIME
CLOCK
00:00:00
TIMING
OFF
AWOKE OFF
TVON
TVOFF
AWTIMR
1.Asure that all the needed signal wires are connect to the TV set.
2.To turn on the TV, press the POWER button, and the power indicated LED lamp will be on.
3.If you first use this TV set, you have to search program, once you have done the following steps, the
program list will be stored in the TV memory.
Press MENU button once and the¡°PRESET¡±function menu will be display on screen, choose the
¡°ASM¡± and then press¡°VOL +¡±to start auto search. Once this function is finished the channel will
goto the first program automatically.
TV OPERATION
PRESET
CHANNEL
00
SKIP OFF
61.25MHz
ASM.SIF
6.0M
FINE
SEARCH
ASM
4.PROG +/- Buttons
Press and release the PROG +/- button, the channel automatically stops at the next/previous
channel set into memory. Press and hold the button down to change channels more quickly
Direct Channel Selection Buttons (0-9)
Press these buttons to select a channel directly. The channel number will appear on the upper right
corner of the TV screen. If an invalid channel number is selected, the display will revert to the
previous channel.
5. The volume can be adjusted to a desired level by pressing the VOL +/- button the VOLUME will be in
dicated on the TV screen by GREEN BARS AND NUMBER. As the sound level increase, so do the BAR
AND NUMBER on the screen, the same is true for decreasing the level.
NOTE:
If the station being viewed stops broadcasting and BACKGROUND being on, the TV will automatically
shut off after 5 minutes.
Menu Navigation
14