Operation Manual

Remote Control Battery Installation

Power Source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation

on AC. Insert the AC cord plug into a standard

110V-240V 50/60HZ polarized AC outlet.

Corrosion,oxidation,battery-leakage and any other

gradually acidic defect of this nature will invalidate

the guarantee.

NOTE:

1.This TV can be connected to the specified voltage

(AC 110~240 volts / 50-60HZ).

2.If the polarized AC cord does not fit into a non-

polarized AC outlet, do not attempt to file or cut the

blade. It is the user's responsibility to have an

electrician replace the obsolete outlet.

4.If you cause a static discharge when touching the

unit, and the unit fails to function, simply unplug

the unit from the AC outlet, wait a few minutes, and

plug it back in. The unit should return to normal

operation.

Requires two AAA batteries(supplied).

Procedure

1. Turn the remote control face down. Remove battery

cover by pressing down on the marking on the

cover and sliding it off in the direction indicated.

2. Install batteries matching(+) and(-) polarity signs.

3. Replace the battery cover by sliding in reverse until

the lock snaps.

Note: Incorrect installation can cause battery leakage

and corrosion that will damage the Remote

control.

Precautions

Replace batteries in pair.

Do not mix battery types(zinc carbon with

alkaline).

Do not recharge, heat, short-circuit,

disassemble, or burn batteries.

Installation