Operation Manual

Always adhere to the safety instructions!

Error Possible cause

The turntable does not work

Is the turntable switched on?

Is the mains plug inserted into the mains socket?

Check the mains socket. Does it have a regular supply of power?

•

The turntable is working,

but no sound can be heard

Is the audio source connected correctly to the input on the ampliﬁer/

mixing desk?

Is the stylus guard still in place?

Is the tone arm lift lifted?

Has the correct phono input been selected on the ampliﬁer/mixing

desk?

Has the volume control on the ampliﬁer/mixing desk been set to its

minimum?

Is the ampliﬁer/mixing desk and the loudspeakers properly

connected?

•

Reproduction is only through one channel

Is one of the cinch ﬁttings incorrectly inserted?

Is the balance control on the ampliﬁer/mixing desk incorrectly set?

•

The tone of the playback sound

is too low or high

Has the speed been correctly set?•

The playback is distorted

Has the stylus force been set correctly?

Is the stylus defective or worn down?

Has the anti skating compensation been set correctly?

Is the record or stylus dirty?

Is the tone arm counterweight set correctly?

•

The pick-up arm can not be lowered Is the tone arm counterweight set correctly?•

Repairs other than those just described should only be performed by an authorised electrician.

3. Explication des symboles

Il convient de respecter les symboles suivants :

9. Troubleshooting

In purchasing the wireless camera system, you have acquired a reliable, state-of-the-art product.

Problems and malfunctions may, however, still arise.

For this reason, the following is a description of how you can eliminate possible malfunctions yourself.