Operator`s manual

C) Connecting to mains

Before connecting the turntable to the mains socket, make sure that the power button (20) is

(OFF)

in position.

Ensure that the voltage selector (21) is set to the correct national voltage level

(230V or 115V).

The manufacturer is not liable for damage resulting from an incorrect setting of the voltage

selector.

Connect the mains cable to the power receptacle (19) of the turntable.

Make sure the input voltage selector (21) is set to Ò230VÓ.

Plug the mains cable to a mains socket.

The connecting device may be damaged, if the turntable was to be connected to a

magnetic-phono input while the switch is set to ÒLINEÓ.

Connecting to computer

Connect the USB port (18) of the turntable to a vacant USB port of a computer via USB cable.

A software CD is included with an open source software, Audacity, Licensed under the GNU General Public

License(GPL)which can record and edit audio signal from USB signal to computer.

For installation and operation instructions and details please visit http://audacity.sourceforge.net/.

B) Connection

Connecting to other audio devices

Connect the phono outputs (16) of the turntable to the phono inputs of an ampliÞer or a mixing

desk through the provided phono cable (red = right channel; white = left channel).

Depending on the type of phono inputs of the connecting device, the “PHONO/ LINE” selection

switch (17).

Set the switch to “PHONO” for plugging into magnetic-phono inputs of the connecting device.

Set the switch to “LINE” for plugging into CD/ AUX/ TAPE (line level) inputs of the connecting device