Operator`s manual

111
Chapter 10: Project Management (Project Mode)
2 Disk free
Displays the amount of free space on the current disk.
3 Current Project
Displays the current Project information (Project name, size, number of bits, sampling rate).
4 [F1] ( MORE) key
This function key is used to recall the screen to back up Projects on the current disk to an external SCSI device
or DAT machine. (See page 118.)
5 [F2] ( CD-R) key
This function key is used to recall the screen to create an audio CD using a CD-R/CD-RW drive connected to
the SCSI connector. (See page 113.)
6 [F3] ( ERASE) key
This function key is used to recall the screen to erase a Project individually on the current disk. (See page 113.)
7 [F5] ( NEW) key
This function key is used to recall the screen to create a new Project. (See page 112.)
8 [F6] ( SELECT) key
This function key is used to select the current Project. (See page 111.)
Selecting a current Project
When you turn on the power to the DPS16, it will automatically recall the Project used last time as the Current
Project. However, you can select a different Project as the Current Project by following the steps below.
1. Move the cursor to the Project you wish to select in the Project list (1).
2. Press the [F6] (SELECT) key.
The Project you selected in step 1 becomes the current Project and appears in the Current Project field
(3).
Pressing the [NUMBER/NAME] key on the Project screen enables you to change the name of the Project
indicated in the Current Project field. See page 17 for more information on entering characters.