Operator`s manual

158
Chapter 13: Using the Effects
STEREO CHORUS
This is a stereo chorus effect that adds the width and spread of the stereo image.
1
2
3
4
5
6
7
8
Parameter Setting range Function
1 Rate1 *1 0.1Hz – 10.0Hz Adjusts the speed of LFO1.
2 Depth1 *2 0 – 127 Adjusts the depth of LFO1.
3 Rate2 *3 0.1Hz – 10.0Hz Adjusts the speed of LFO2.
4 Depth2 *4 0 – 127 Adjusts the depth of LFO2.
5 Fdback *5 0 – 127 Adjusts the feedback amount.
6 Width *6 0 – 127 Adjusts the width and spread of the stereo image.
7 Balance +50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
8 Effect ON/OFF Switches the effect sound output on and off.
XOVER CHORUS
This is a variation of the STEREO CHORUS. The feedback from the L/R channels is input to the opposite
channels.
1
2
3
4
5
6
7
8
Parameter Setting range Function
1 Rate1 *1 0.1Hz – 10.0Hz Adjusts the speed of LFO1.
2 Depth1 *2 0 – 127 Adjusts the depth of LFO1.
3 Rate2 *3 0.1Hz – 10.0Hz Adjusts the speed of LFO2.
4 Depth2 *4 0 – 127 Adjusts the depth of LFO2.
5 Fdback *5 0 – 127 Adjusts the feedback amount.
6 Width *6 0 – 127 Adjusts the width and spread of the stereo image.
7 Balance +50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
8 Effect ON/OFF Switches the effect sound output on and off.