Operator`s manual

14: Synchronization
Page 124
3) Press the SYNC(SYNC) key.
You will see a display similar to the following:
4) Use the JOG/SHUTTLE control to select the “RS422-MC” (Machine Control) menu.
5) Press the STORE/ENT key.
6) Use the JOG/SHUTTLE control to select “MASTER” mode.
7) ress the STORE/ENT key.
8) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
9) Press the SYNC(SYNC) key.
You will see a display similar to the following:
10) Use the JOG/SHUTTLE control to select the “RS422-TC” menu.
11) Press the STORE/ENT key.
12) Use the JOG/SHUTTLE control to select mode.
13) Press the STORE/ENT key.
14) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
15) Press the SYNC(SYNC) key.
You will see a display similar to the following:
16) Press the STORE/ENT key.
17) Use the JOG/SHUTTLE control to select “LTC SLAVE mode.
18) Press the STORE/ENT key.
In this case, the DR16pro will chase both LTC and also timing information from the VTR on
the RS422 line to assure more precise synchronisation.
ABS
S-M
ABS
S-M
ABS
S-M