Operator`s manual

16: Other Functions
Page 136
Loading Settings from Flash ROM
Settings that have been saved to Flash ROM will automatically be used as the default settings
each time a new project is created. You can also manually load the settings from Flash ROM which
can be useful if you want to override the settings that may have been loaded from a project created
on another machine.
1) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
2) Press the 3(SET UP) key – numeric keypad.
3) Use the JOG/SHUTTLE control to select the FLASH LOAD function.
You will see a display similar to the following:
4) Press the STORE/ENT key.
The message “SURE ??”will appear on the display.
(If you do not want to load the settings, press the ESCAPE key.)
5) Press the STORE/ENT key.
The message “DONE” appears momentarily on the display indicating that the current set-
tings have been successfully loaded from Flash ROM.
ABS
S-M