Operator`s manual

6: Projects
Page 56
Deleting Project Files
You can delete existing project files from any connected hard disk.
To delete a project file:
1) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
2) Press the 4(UTILITY) key – numeric keypad.
The message “LOAD PROJ” will appear on the display.
3) Rotate the JOG/SHUTTLE control to select the Delete Project function.
The message “DEL PROJ” will appear on the display.
4) Press the STORE/ENT key.
The message “SCSI ID 0” will appear on the display.
5) Rotate the JOG/SHUTTLE control to select the SCSI ID number of the hard disk that
contains the project you want to delete.
The SCSI ID numbers range from 0 to 6. The internal hard disk uses SCSI ID 0. External hard
disks can be assigned SCSI ID numbers 1 through 6. See “SCSI IDs” on page 98.
6) Press the STORE/ENT key.
The name of a project located on the specified disk, such as “DR16 DATA1”, will appear on
the display.
7) Rotate the JOG/SHUTTLE control to select the project you want to delete.
8) Press the STORE/ENT key.
The message “SURE ??” appears momentarily on the display.
(If you do not want to delete the project, press the ESCAPE key.)
9) Press the STORE/ENT key.
The message “DONE” appears momentarily on the display.
The DR16pro deletes the specified project.
Note: You cannot delete the current project. If you try to delete the current project, the
message “CAN’T DEL” will appear momentarily on the display. If you want to delete the
current project, first load a different project and try again.