Operator`s manual

6: Projects
Page 59
10) Press the STORE/ENT key.
The message “DONE” appears momentarily on the display.
The DR16pro is now operating under the new project name and new recordings will be made
directly into the new Protools Session file.
Note: If the name you try to assign already exists on the selected hard disk, the message
“ BAD NAME ” will appear on the display. In this case, rename the project and press the
STORE/ENT key.
When a new Session file is created, a folder with the new Session’s name will be created at
the root level of the selected disk. The new Session file is placed inside this folder together
with folders for Audio Files and Fade Files. All SD-II or AIFF files recorded into this Session
will be placed into the folder labeled ‘Audio Files’.
Project save
The new menu “S AV E PR O J” has been added to the UTILITY page of SUB-MENU mode.
This enables to save projects under different names.
This allows you to save a project that may have undergone extensive editing either as an alter-
native version of the song or as a safeguard in case of any irreversible mistake.
Another application for this is to create ‘template’ projects. These are empty projects that con-
tain certain configurations of customised settings files which can subsequently be used as the
basis for new projects that require these settings. The actual projects you make using these
‘templates’ can, of course, also be saved with a new name.
To save a project with a different name.
1) Press the SUB-MENU key followed by the UTILITY key.
2) Select “S AV E PR O J” using the JOG/SHUTTLE control then press the STORE/ENT
key.
3) Input the new project name you want to save using the JOG/SHUTTLE control.
4) Press the STORE/ENT key to save.