DVD PLAYER DV-P3410 DV-P3410 DVD/VCD/CD PLAYER OPEN/CLOSE STANDBY POWER LEVEL PHONES MIN MAX 1~24
Dear Customers Precautions May we take this opportunity to thank you for purchasing this DVD/VIDEO CD/CD player. We strongly recommend that you carefully study the operating instructions before attempting to operate the unit and that you note the listed precautions Please read these precautions before operating this unit.
Accessories Features • 96 kHz/24 bit audio D/A converter This player enables 96 kHz/24 bit linear PCM signals, which constitute the highest specifications in the DVD standards, to be reproduced faithfully. Please check and identify the supplied accessories. • Advanced Dolby Digital (AC-3)/5.1ch surround decoder The advanced Dolby Digital (AC-3)/5.
Table of contents Getting Started: Advanced Operation Safety information .............................................. 1 Precautions ...................................................... 1 Features ........................................................... 2 Accessories ......................................................... 2 Index .................................................................. 3 Control reference guide .................................... 4 Basic Connection ....................
Controls and positions 2 1 5 8 7 ON OFF STANDBY PHONES 3 4 9 6 Main Unit 10 11 12 13 [5] Disc tray [6] [7] [8] [9] [10] [11] [12] [13] [1] POWER button Press to switch on the player or power off. [2] STANDBY indicator When the player is connected to the AC power supply, this indicator lights up in standby mode and goes out when the player is turned on.
Basic Connection • This player must be connected to a PAL TV or NTSC TV with A/V inlets. • Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power cords before commencing connection. • Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. • Read through the instructions before connecting other equipment. • Ensure that you observe the color coding when connecting audio and video cables.
Basic Connection Connecting to a TV set or monitor with component video input connectors TV set or monitor To audio input connectors (red, white) To Video input connector (Scart) Scart cable Video/audio cable DVD/VCD/ CD/MP3 player • The description of the component video input connectors may differ depending on the TV set or monitor (e.g. PR/PB/ Y, R-Y/B-Y/Y, Cr/Cb/Y and so on). Refer to the instruction manual of your TV set for details.
Optional Audio connections Connecting to an amplifier for Dolby Digital (AC-3) or DTS decoder When DVD recorded in Dolby Digital (or DTS) are played, Dolby digital bitstream is output from the player's OPTICAL digital audio output connector or COAXIAL digital audio output connector. When the player is connected to a Dolby Digital amplifier, you can enjoy theater-quality audio in your home.
Optional Audio connections Concerning the audio output from the player's optical coaxial digital audio output connector Sound recording format Dolby Digital (AC-3) Optical/coaxial digital audio output from connector Linear PCM (48/96kHz 16/20/24 bit) Linear PCM (2ch) (48 kHz sampling/16 bit only) *2 or no output*1 Video CD MPEG 1 PCM (44.1 kHz sampling) CD Linear PCM Linear PCM (44.1 kHz sampling) Disc DVD Dolby Digital bitstream (2-5.
Remote control unit preparation A Battery installation A Insert the batteries while observing the correct (+) and (-) polarities as illustrated at right. Service life of batteries • The batteries normally last for about one year although this depends on how often, and for what operations, the remote control unit is used. • If the remote control unit fails to work even when it is operated near the player, replace the batteries. • Use size UM-4 batteries. Note: • Do not use rechargeable (Ni-Cd) batteries.
Before enjoying DVD/Video CD/CD The On-Screen menu language of your player has been factory pre-set to English. If you would like to change the menu language, please refer to "Selecting language of On-Screen Display menu". In the explanation given below it is assumed that English has been selected as the menu language. Please refer also to chapter “Initial setting” - Page 19. OPEN/CLOSE Basic play Preparations • Switch the TV ON and select "Video" as the TV input.
Stopping play Press STOP For your convenience: • When play is stopped, the player records the point where STOP was pressed (RESUME function). Press PLAY again, playback will resume from this point. When the tray is opened or STOP is pressed again, the RESUME function will be cleared. OPEN/CLOSE Skipping ahead or back Skipping ahead Press NEXT SKIP button during play A chapter (DVD) or a track (Video CD/CD) is skipped each time the button is pressed.
Enjoying Video CDs with playback control • When playing VCDs2.0/3.0, press PBC button, on the screen, "PBC" will light up. it shows that the playing is with play-back control - the player will play from the beginning of the disc. POWER REPEAT PBC ON EJECT SUBTITLE • Press PLAY button, on the screen, the menu appears.
Slow-motion play (DVDs/VCDs) By the remote control unit Press SLOW button during play. • Plays the disc at a 1/2 normal speed at first. Each time the button is pressed, the playspeed becomes1/4, 1/6, 1/7. • Press the PLAY button, normal play will resume. 1/2 POWER Enjoying Video CD without using menus (Video CD only) REPEAT EJECT SUBTITLE 1. Press PBC button after the menu screen appears (“PBC”will disappear from the display). 2.
MP3 Files Playback This unit is compatible for the reproduction of recorded pieces in MP3 format. Refer to the following instructions for a correct use: 1. Insert the disc containing the recorded passages in MP3 format to be playbacked and after a few seconds, on the TV screen will appear an icon of confirmation bearing the logo MP3. 2. The player will begin playback automatically departing from the first track. 3.
Program Play This player plays the tracks in the disc in an order you desired. 1. Press PROGRAM button in the stop mode, and the screen will display program menu. POWER REPEAT EJECT SUBTITLE 2. Press JOYSTICK buttons to move the cursor through the apposite area, then enter using the numeric buttons the desired track number (or chapter / capt in case of DVD). A-B 1/ALL DISPLAY FUNCTION ZOOM AUDIO ANGLE 1 2 3 4 5 6 7 8 9 0 +10 CLEAR • Up to 16 tracks can be programmed.
Repeat play Repeat viewing (listening) 1. Press REPEAT 1/ALL button each time during play, it will repeat play one chapter or one title (for DVD disc), or repeat play one track or all tracks DVD DISC REPEAT CHAPTER POWER REPEAT Repeat chapter EJECT SUBTITLE REPEAT A-B 1/ALL DISPLAY FUNCTION ZOOM AUDIO ANGLE 1 2 3 4 5 6 7 8 9 0 +10 CLEAR TITLE Repeat title PLAY OFF STOP Cancel repeat SELECT PAUSE/ STEP SLOW VCD/CD DISC (In the PBC OFF mode) REPEAT SINGLE PBC RETURN F.
Changing subtitle language (DVD only) It is possible to change the subtitle language to a different language from the one selected at the initial settings. ( This operation works only with discs on which multiple subtitle languages are recorded) 1.Press SUBTITLE button during play, the screen will display the current language, each time the button is pressed, language is changed. 2.Press SUBTITLE button to turn this function on or off.
Search for preferred scene Some discs with movies, for example, may be available with two or more titles. If the disc has a title menu recorded on it, it is possible to select a specific scene directly by using SEARCH button. When playing DVD disc 1.Press SEARCH button during play, then press NUMERIC button to choose number corresponding to the desired title. POWER REPEAT Enter Time, Minute and Sec. EJECT SUBTITLE 2.
Initial setting Once the initial programming is entered it is retained in memory until changed. the player can always be operated under the same conditions. The settings will be retained in the memory until the settings are changed even after setting the player to the standby mode. Common procedure for initial settings 1.Press SETUP button in the stop mode. Language Video Audio POWER Rating REPEAT EJECT SUBTITLE 2.
Select TV Screen Type Choose TV by using Joystick, then press SELECT button to open TV menu, then press it again, the screen type is open. Language Video TV Shape Video Audio Rating 4:3 PS 4:3 PS Pal L:3 LB 16:9 Move cursor to VIDEO item, then press SELECT button to choose different output type.
Selecting Rating Level This function will disactivate the playback of certain DVDs not suitable for children. · Some DVDs are rated at a certain specific level. If the rating level of the DVD is higher than the one selected in the settings, the playback of that DVD will be forbidden. Enter 4 digit, press SELECT button to confirm. Enter original password to unlock code, or enter available password (9999) to unlock code, if the original password is forgot.
Definition of terms Specifications Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles. Power requirements: AC 110-230V, 50/60Hz Power consumption: 25W (approx. 3.0W when set to the standby mode either by the power button or the remote control unit).
Trouble-shooting Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a adjustment on your part may eliminate the problem and restore proper operation. Symptom (Common) Remedy No power. Insert the AC power plug securely into the power outlet. • Play fails to start even when PLAY is pressed. • Play starts but then stops immediately.
Symptom (DVD) Remedy Play does not start even when title is selected. Confirm the "Ratings" setting. Audio soundtrack and/or subtitle language is not the initial settings. If the audio soundtrack and/or subtitle language does not exist on the disc, the language selected at the initial settings will not be seen/heard. No subtitles. • • Subtitles appear only with discs which contain them. Subtitles are cleared from the TV monitor, Perform the steps on page 19 to display the subtitles.
Region Management Information Region management Information: This DVD/VCD/CD player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD/VCD/CD player, this DVD/VCD/CD player cannot play this disc. The Region number for this DVD/VCD/CD player is . AKAI ELECTRIC CO., LTD.
