Operation Manual

GENERAL OPERATION
Standby/ON
When you connect the unit for the first time to the mains socket, it will be in switch ON mode automatically.
- Press the button to switch the main unit in STANDBY mode, the POWER indicator will be red.
- Press the button again to switch the unit back into ON mode, and the POWER indicator will be Green.
- Disconnect the mains plug from the mains socket if you want to switch OFF the unit completely.
Select the Play Mode
Press the ,OPTI ,COAX, AUDIO and AUX button on the remote control to select the desired audio source.
Note:
- If there is no signal, the unit will automatically switch off within 19 minutes to save energy.
Adjust the Volume
- Press the VOL +/– buttons to adjust the volume.
- If you want to turn off the sound, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL+/- button to resume normal listening.
Noted please, if you adjusted volume above 26, then power off and power on again, volume
will restored to factory setting automatically.
Select the Sound Effect
While playing, press the MUSIC (recommended for listening to music or video, NORMAL (no effect)
or NEWS (recommended for listening to News) button on the remote control to select the desired
preset equalizer.
AUX/AUDIO IN/COAXIAL/OPTICAL OPERATION
1. Press the AUX, AUDIO, COAX and OPTI button on the remote control to select the desired source.
2. Operate your audio device directly for playback features.
3. Press the VOL +/– button to adjust the volume to your desired level.
[30]