Operation Manual

In order to avoid interferences, please de-activate Wi-Fi on your device (Smartphone,
tablet, etc…) when playing music using Bluetooth.
BLUETOOTH OPERATION
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices.
You need to pair your Bluetooth device with this unit before you connect them for the first time.
Pair Bluetooth-enabled Devices
Note:
- The operational range between this unit and a Bluetooth device is approximately 10 meters (without
any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure that you know the device's capabilities.
- Any obstacle between this unit and the Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth device may disconnect, but it will re-enter
automatically into pairing mode.
1. During ON mode, press the button on the remote control to select the Bluetooth mode. If the unit
is not paired to any Bluetooth device, the system enters automatically into pairing mode; or you
need to press and hold the PAIR button to start pairing.
2. Activate the Bluetooth function on your device and select the search mode. “HT993” will appear on
your Bluetooth device.
3. To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.
Tips:
· If there is already an existing connection, press the PAIR button on the remote control to re-activate
the pairing mode. The existing connection will be interrupted.
· The unit will also be disconnected when your device is moved beyond the operational range.
· If you want to reconnect your device to this unit, place it within the operational range.
· If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the unit.
· If the connection is lost, follow the above instructions to pair your device again to this unit.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the button.
- To skip to a track, press the , buttons.
[31]