User guide

17
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets
Standard Default settings
Dynamic Recommended settings for fast moving pictures
Mild Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Ecohome Power saving mode which reduces the energy used by up to
25% (by reducing the power to the LED/LCD panel).
In Ecohome mode, the TV will switch itself to Standby mode
after 4-5 hours in the event that the TV buttons or remote
control buttons are not pressed (see the time menu to
de-activate this function).
Contrast - Switch the balance between black and white
Brightness - Increase or decrease the brightness of the picture
Colour - Increases the colour from black and white
Tint - Lets you increase or decrease the level of tint within the picture
Sharpness - Increase or decrease the sharpness of the picture
Colour Temperature - Choose from the following presets
Normal Default settings
Warm Increases red within the picture
Cool Increases blue within the picture
Noise Reduction - Choose from the following presets
Off Turns noise reduction off
Low Minor system adjustment
Middle Medium system adjustments
High Maximum system adjustments
Default Default settings
User Guide - 32-126J-GB-5B-HCU-UK, 40-126J-GB-5B-FHCU-UK.indd Sec1:17User Guide - 32-126J-GB-5B-HCU-UK, 40-126J-GB-5B-FHCU-UK.indd Sec1:17 5/15/2013 3:22:01 PM5/15/2013 3:22:01 PM