Operator`s manual

158 Version 1.21
EDIT SAMPLE /
XFADE LENGTH This allows you to set the crossfade length. The longer the crossfade,
the more the second sample is pulled back into the first. For example:
No crossfade
SAMPLE A SAMPLE B
6 seconds
1 Second Crossfade
SAMPLE A SAMPLE B
5 seconds
XFADE CURVE This allows you to select a crossfade curve. The choices are LINEAR,
LOG and SINE.
Pressing JOIN SAMPLES (F16) will pop-up the usual progress display followed by the PLAY/
KEEP ORIGINAL/NEW/BOTH and RENAME prompt. However you will note a slight difference in
the ‘keep’ prompt:
The options are basically the same and you can compare the new sample with the originals but
because there are two originals with this process, you have the opportunity to play each one
before deciding to keep or discard them. If in doubt, press KEEP ALL and decide what to do with
the originals afterwards.