Operator`s manual

Version 1.21 205
/ FX
PING PONG This allows you to create stereo ‘ping pong’ echo effects that bounce
back and forth from left to right. A setting of 00 creates a mono echo
effect. A setting of +50 will create a ‘ping pong’ echo effect that goes
from right to left and back again. A setting of -50 will create a ‘ping pong’
echo effect that goes from left to right and back again. Settings in between
00 and ±50 will give ‘asymmetric’ or syncopated ‘ping pong’ effects.
For example, with a delay time of 500mS and a PING PONG setting of
+/-50, the result will be equally spaced repeats of 250mS. I.e.:
LEFT
RIGHT
IN
500mS 1Sec 1.5Sec
250mS 750mS 1.25Sec
With a PING PONG setting of, say, +/-25, however, the first repeat will
come after 125mS, the second after 500mS, the third after 625mS, etc.
(depending on the amount of feedback). I.e.
RIGHT
IN
500mS 1Sec 1.5Sec
LEFT
125mS 625mS 1.125Sec
MONO L/R
This sums the left and right outputs of the modulation section into a mono delay:
The parameters are identical to the MONO LEFT delay.
NOTE: Please note that because the stereo mod section passes through the echo section,
any stereo mod effects you create will be ‘monofied’ when either of mono delay effects described
above are selected. To enjoy stereo modulation effects with echo, please choose the stereo
delay option (see below).