Operator`s manual

Version 1.21 207
/ FX
REVERB EFFECTS
The EB20 offers four channels of stereo reverb, RV1-4. RV1 and RV2 are associated with the two
multiFX channels and these may be accessed in the main FX page by pressing REVERB 1 (F10)
or REVERB 2 (F11) or via the main MULTIFX page. RV3 and RV4 are two ‘spare’ reverb-only
channels accessed in the main FX page on F12 and F13 respectively. However you access the
reverb page, you will see something like this:
As you can see, apart from the block diagram of the multiFX chain, both reverb screens are almost
identical.