Operator`s manual

Version 1.21 209
/ FX
When either of the GATED reverb types are selected, the screens change slightly:
The parameters for both gated reverb types are identical:
PRE-DELAY Sets the time between the original sound and the onset of the gated
reverb effect.
REVERB DECAY Sets the length of the gated reverb effect.
DIFFUSION Sets the density of the gated reverb effect.
REVERB LEVEL and REVERB PAN serve the same function as for the other reverb types but the
gated reverb types do not have LF or HF damping or the NEAR parameter.
NOTE: The same parameters are available for RV3 and RV4 of course.
When the REVERSE reverb type is selected, a slightly different screen is shown:
The parameters are identical to the gated reverb types described above.