Operator`s manual

216 Version 1.21
SAVE /
SAVE
Once you have done work on multis, programs and samples, you will no doubt want to save them.
This is done using the SAVE key.
Depending on what you are working on, pressing SAVE will show something like this screen:
In this example, you were working on the multi BACKING TRACK 2 when you pressed SAVE. This
is therefore the item selected to save. Had you been working on a sample or a program, the
appropriate item would be shown to be saved.
The window shows the current contents of memory and you may select another item to save if you
prefer. To save the selected item, press F14. This key’s label changes according to the item selected
(i.e. multi, program, sample). If you want, you can save the entire contents by pressing F8.
Also shown is the currently selected folder where the selected item(s) will be saved to. If you need
to change the destination folder (or disk), press VIEW DISK. The window will change: