Operator`s manual

Version 1.21 35
/ LOAD
SELECTING DISKS
If you have more than one disk drive attached, you may select the one you want to load from using
the DISK LIST. This is accessed by pressing F8 in the main LOAD page and you will something
like this screen:
If a disk has partitions, you will see something more like this:
Disks and their partitions are shown as ‘virtual’ drives giving you direct access to them thus making
access to sounds very quick.
The disk you want to use is selected simply by touching the key to its left (or using the SCROLL
KEYS on F15/16 or using the DATA wheel) and pressing SELECT DISK (F8). This will select the
disk and automatically return you to the LOAD page where you will see its contents.
TIP: You can select a disk very quickly simply by ‘double clicking’ the key to its left.
**** VERY IMPORTANT NOTE ****
If you have removable disks of any kind (Zip, Jaz, CD-ROM, etc.) and change
the disk,
you must always press UPDATE on F11 to refresh the list.
Failure to do so may result in unpredictable behaviour.
If you need to find out about the selected disk, use GET INFO (this is described on the next page).
If you do not wish to select another disk, simply press CLOSE LIST (F9).