Operator`s manual

Version 1.21 65
/ MULTI
You can confirm this by pressing RENUMBER:
In either screen, you can convert such a setup simply by moving the
cursor to any program sharing the same program number and pressing
CONVERT OLD MULTI. You will receive this prompt:
Press ADD TO CURRENT to add the selected program number to the
currently selected multi or press CREATE NEW to create a new multi to
add the program(s) to. If you create a new multi, its name will be that
shown in the prompt (i.e. S1-3K MULTI 1).
The multi will now contain all programs of the same number and the
MIDI channels, levels, pan position, output assignments, tuning, etc.,
used in the ‘old’ multi/layer will automatically be set and the new format
multi should play pretty much the same as the original would on an S1000,
S3000 or whatever.
NOTE: The function is not foolproof. For example, you may load in an old S1000-style ‘multi’
numbered, say, #3. If any other programs with that number are already loaded, they too will be
converted in this process. As such, the function is best used in the RENUMBER page so that
you can see programs’ numbers. The RENUMBER function is described below.