Operator`s manual

86 Version 1.21
EDIT PROGRAM /
MIDI/TUNE
Pressing MIDI/TUNE in the main EDIT PROGRAM page will show this screen:
The parameters are:
PROGRAM NUMBER Sets the MIDI program number for the selected program. This allows
you to select programs remotely via MIDI within a part in a multi.
NOTE: You may also set the MIDI program number in the RENUMBER page in PART or
PROGRAM TOOLS > PROGRAM LIST. This may be more convenient as you can see the
program numbers for other programs simultaneously.
SEMITONE TUNE Allows you to tune the program in semitones.
FINE TUNE Allows you to fine tune the program.
TUNE TEMPLATE This allows you select from a variety of different tuning templates such
as EVEN-TEMPERED, ORCHESTRAL, WERKMEISTER, etc.. You may
also set your own tuning template by selecting USER which you may
freely edit in the EDIT USER page.
KEY Sets the key signature for the tuning template. The normal Western
EQUAL TEMPERAMENT allows you play in any key you like (which is
why it was developed!) but the other tunings can only be used in certain
key signatures. So, for example, if you want to use the WERKMEISTER
tuning on a piano sound and the piece you want play is D#, select D# in
the KEY parameter.
COPY TO USER This key allows you to copy one of the preset templates to the USER
template so that you may edit it. To edit one of the templates, first select
it in the TUNE TEMPLATE field and press COPY TO USER. Now select
USER as the TUNE TEMPLATE. You may now use EDIT USER to modify
it.