Installation Guide

General Installation Instructions

The instructions given are for our

general installation guide for all

showerheads and/or hand shower

combos. To begin installation, pliers

and a soft cloth are required.

Apply the included Teflon tape by

wrapping it around the shower arm

threads a few times.

Insert a rubber washer into the

showerhead.

Position the showerhead over the

shower arm outlet.

Next, hand tighten the showerhead

to the shower arm.

After, wrap a soft cloth over the

connection.

With the cloth fully covering the

connection, use pliers to further

tighten. Be careful not to mar the

surface of the shower head with the

pliers.

If you purchased a showerhead

your installation is complete. For

hand showers and combos, please

see the next step.

To attach the hose, begin by insert-

ing a rubber washer into one end.

PAGE 1
General Installation Instructions The instructions given are for our general installation guide for all showerheads and/or hand shower combos. To begin installation, pliers and a soft cloth are required. Apply the included Teflon tape by wrapping it around the shower arm threads a few times. Insert a rubber washer into the showerhead. Position the showerhead over the shower arm outlet. Next, hand tighten the showerhead to the shower arm. After, wrap a soft cloth over the connection.
PAGE 2
General Installation Instructions Insert another rubber washer into the other end of the hose. Tighten one end to the showerhead using pliers and a soft cloth. Lastly, attach the shower wand to the hose and tighten until snug. Your installation is now complete. NOTE: If your showerhead droops, disassemble the showerhead portion and flip the orientation of the rubber washer.