Installation Guide

(Photo shown may vary from the product.)
Parts Breakdown
1. Door Hinge
2. LED Light
3. Fan Housing
4. Shelves (Wire or Beech Wood)
5. Adjustable Feet
6. Control Panel
7. Light Switch
8. Glass Door
9. Door Handle (only on some models)
10. Door Frame
11. Magnetic Seal
Temperature Adjustments
When initially turned on, the LED will show the ambient temperature.
Your wine cooler has electronic temperature control on the front of the unit. You
can set the temperature of your wine cooler at any setting within the normal op-
erating range.
By pressing the (+) or (up arrow) temperature button on the display you can
increase the temperature. Pressing the (-) (down arrow) temperature button will
lower the temperature. Your wine cooler also has a light showcasing your wine
and for added visibility. A light switch on the control panel will activate the LED
light. Under normal operation it is best for the light to remain off.
 Thermoelectric wine coolers will not go more than 15-20°F below the ambi-
ent temperature.
 If you have just installed your wine cooler, please plug it in and allow the
wine cooler to sit for 2 hours before use. The allows time for the internal
cabinet temperature to cool down.
 An ambient temperature between 78-80°F is recommended for optimal
cooling. If the wine cooler is in a warmer environment, the performance of
the unit will be negatively affected.
 Minor differences between the internal cabinet temperature and LED dis-
play is normal.
Wine Cooler Features & Use