Installation Guide

Installation

STEP 7

Connect to AC

DANGER:

and all local codes and requirements.

label on back of appliance.

regulations in force.

The electrical socket must be easily accessible with the appliance installed. In all cases, the power supply lead must

be positioned so that it does not reach a temperature of 50°C (122°F) above the room temperature at any point.

therefore necessary that all installation and connection operations are carried out by qualified personnel, complying

with the local and general regulations in force.

STEP 6 (ranges only)

Install Anti-Tip Bracket

To reduce the risk of tipping of the range, the range must be

secured to the floor with a properly installed Anti-Tip Bracket

(included).

All ranges can tip and cause injuries. Install anti-tip device

packaged with range, follow all Installation Instructions.

Failure to install the Anti-Tip Bracket will allow the range

to tip over if excessive weight is placed on an open door

or if a child climbs upon it. Serious injury might result from

spilled hot liquids or from the range itself. If range is ever

moved to a different location, the Anti-Tip Bracket must be

re-installed.

Make sure the anti-tip bracket is installed:

Slide range forward.

Make sure the anti-tip bracket is securely attached

to the wall behind the range.

Safely tilt the front of the range upward slightly and

move back against wall, Making sure the pin slides

under bracket.

Figure 19

Anti-tip bracket

Range back panel