Installation Guide

WARNING:

can cause overheating or burning.

contact with any parts or components that get hot.

STEP 8A (range tops only)

Finish Installation

Gently slide in the range top half into the cut-out,

make sure your gas connection and electrical power

plug are properly installed.

range top all the way back to the wall.

Once this is done you’re now ready to slide the

(grounding) plug which mates with a standard three-

The power cord is equipped with a three-prong

prong grounding wall receptacle to minimize the

possibility of electrical shock hazard from the appliance.

relative to location of the wall receptacle and a warning

to the user to disconnect the electrical supply before

serving the appliance.

encountered, it is the responsibility and obligation of the

customer to have it replaced with a properly grounded

threeprong wall receptacle. Do not cut or remove the

grounding prong from the power cord.

Figure 20 Figure 21 Figure 22

Install all burners and burner caps.

Install all grates.

STEP 8B (ranges only)

Finish Installation

When all connections have been made, check that

all range controls are in the “off” position and turn

on the main gas supply valve.

Installation