Owner manual

ManualsBrandsAkiles ManualsEquipmentOffiWire

Table Of Contents

INTRODUCTION

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW , A MODERN, PRACTICAL AND RELIABLE

PUNCH AND BINDING EQUIPMENT. YOUR WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS

TO GUARANTEE AN EFFORTLESS AND EASY BIND, AS WELL AS MANY YEARS OF TROUBLE- FREE SERVICE.

IMPORTANT

WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOUR SELF WITH THE FUNCTIONS OF

YOUR NEW . YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANYONE CAN ACHIEVE

PROFESSIONAL RESULTS.

FEATURES

OPERATIONAL MANUAL

Summary of content (4 pages)

PAGE 1
OPERATIONAL MANUAL INTRODUCTION CONGRATULATIONS ON THE PURCHASE OF YOUR NEW , A MODERN, PRACTICAL AND RELIABLE PUNCH AND BINDING EQUIPMENT. YOUR WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS TO GUARANTEE AN EFFORTLESS AND EASY BIND, AS WELL AS MANY YEARS OF TROUBLE- FREE SERVICE. IMPORTANT WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOUR SELF WITH THE FUNCTIONS OF YOUR NEW . YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANYONE CAN ACHIEVE PROFESSIONAL RESULTS.
PAGE 2
ASSEMBLY Your Comes fully assembled. Simply place it on top of a sturdy work table and you are ready to work. PUNCHING 1. Move (align) Side Margin Guide to proper sheet & cover size. Remark: There are different side margin setups for 11" sheets and their 11-1/4" covers. Letter size Sheet (11") Cover 2. Insert sheets and pull handle forward to punch. 3. Return Punch handle to its upright position. 4. Repeat steps two and three as needed. TIPS: a) Maximum single punching: 10 sheets of 20 lbs.
PAGE 3
BINDING (INSERTING & CLOSING) 1. Slide Document to be bound into the Wire Selector, to determine the correct wire size to use. See picture 1. 2. Slide selected wire into the Wire Snatch. See picture 2. 3. Insert document from last pages to first pages. Then insert front cover. The back cover should be inserted last with the inside facing up. See picture 3. 4. Take out inserted document from the wire snatch. See picture 4. er ov Ba ck Co ve r C Ba c k C ov er Wire 5.
PAGE 4
TECHNICAL INFORMATION WARRANTY YOUR HAS A WARRANTY OF ONE YEAR, FROM ITS PURCHASE DATE. IN THE EVENT OF A MANUFACTURERS DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT. IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISS TREATMENT OF THE UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE, WHETHER IT IS REVERSIBLE OR NOT. IF THE IS NOT OPERATING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS ABOVE.