Service manual

21
Model No: AC-S10CK_S10HK
Version 1.0
13. TIMER MODE OPERATION
l The setting time ranges from 0.5 hour to 24 hours.
l OFF-TIMER can be set when the appliance is in operation, and it will be
switched OFF when the preset time is achieved.
l ON-TIMER can be set when the appliance is in suspension, and it will be
switched ON when the preset time is achieved.
l Pressing TIMER button once, the last setting time display on the LCD of remote
controller. You can adjust the setting time by pressing the TEMPERATURE
SETTING BUTTON. Pressing the TIMER button again, the timer mode is se-
lected and the yellow LED indicator on the indoor unit lights up.
l The TIMER mode can be cancelled by pressing the TIMER button again on the
remote controller.
14. SLEEP MODE OPERATION
l The SLEEP mode can only be set during COOLING,DRY,SMART or HEATING
operation.
l An energy conservation operation will be achieved if selecting SLEEP mode
combined with OFF-TIMER. The operation will be turned OFF after the preset
time. The maximum preset time of SLEEP mode is 8 hours(default time).
l When selecting the COOLING or DRY operation with SLEEP mode, the
operation diagram is as following. The setting temperature will be raised by
0.5
o
C per hour in the first two hours after the starting. The operation will stop
after 8 hours.
l When selecting HEATING operation with SLEEP mode, the setting temperature
will be decreased by 3
o
C during successive 3 hours later. The operation will
Set temp.
Max 8 hours
2 hours
1 hour
0.5¡æ
0.5¡æ
SLEEP START
SLEEP STOP
Downloaded from AC-Manual.com Manuals