User Manual

Operation

38 BKS 4540

OPERATION

STARTING ENGINE

1 Untwist and remove the fuel cap and oil cap. Rest the cap on a

dustless place.

2 Put fuel into the fuel tank and fill the chain oil into the oil tank to

80% of the full capacity.

3 Fasten the fuel cap and oil cap securely and wipe up any fuel

spillage around the unit.

4 Put the switch to the "I" position.

5 Continuously push the primer bulb until fuel comes in the bulb

(1) Oil (4) Choke knob

(2) Fuel (5) Primer bulb

(3) Engine switch

6 Pull out the choke knob. The choke will close and the throttle

lever will then be set in the starting position.

ADVICE

When restarting immediately after stopping the engine. Set

choke in the open position.

ADVICE

Once the choke knob has been pulled out, it will not return to

the running position even if you press the throttle trigger or press

down on knob with your finger. When you wish to return the

choke knob to the running position, press the throttle trigger ins-

tead.

1 Push the front handle guard down toward the front to activate the

chain brake.

2 Push in the decompression valve button. (If applicable)

ADVICE

When firing occur, the decompression valve will return to the

close position automatically, you should push in the decompres-

sion valve button before each starting.