Installation Guide

4/12/17 1 of 2 Bench

Alaterre Furniture

Shaker Cottage Bench

Thank you for purchasing our Shaker Cottage Bench. We have found it helpful to have a

second person present in at least one step of the assembly.

Bench Assembly Instructions

Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.

Allen Wrench

Hex Bolt-30mm

NO.

DRAWING

DESCRIPTION

Q'TY

Bottom

Top Unit

Leg

NO.

DRAWING

DESCRIPTION

Q'TY

Hex Bolt-45mm

PAGE 1
Alaterre Furniture Shaker Cottage Bench Thank you for purchasing our Shaker Cottage Bench. We have found it helpful to have a second person present in at least one step of the assembly. Bench Assembly Instructions Lay out all parts on a "non-abrasive"surface to avoid scratching furniture. NO. DRAWING DESCRIPTION Q'TY A Top Unit 1 B Bottom 1 C Leg 4/12/17 DESCRIPTION Q'TY D Hex Bolt-45mm 4 E Hex Bolt-30mm 4 F Allen Wrench 1 NO.
PAGE 2
PARTS Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to prevent damage to the finish. Step 3 Lay Top Unit (A) upside down and attach 2 Posts (C) by using 2 Hex Bolts 45mm (D). Note: It will help to have a second person at this time to assist in assembly.