Owner`s manual

26
1. Press AUTO. AUTO appears.
2. Pressing AUTO keys or turn TUNE knob, to select the channel bank.
3. Press and hold down ENTER, then press /\ to sort channels from the lowest to
the highest frequency, or press \/ to sort channels from the highest to the lowest
frequency. As the scanner sorts the frequencies, Sor. appears on the display.
USING MONITOR MEMORIES
Monitor memories are temporary storage areas where you can store up to 50
frequencies while you decide whether or not to save them into channels. You can
manually select monitor memories, but you cannot scan them.
You can store frequencies you find during search operation, into monitor memories.
Simply press MON when the desired frequency appears on the display. The channel
number to the right of MON indicates the current monitor memory.
To listen to a monitor memory, press MAN, then press MON. The current monitor
memory appears. To select other monitor memories, use the number keys to enter
the monitor memory's number (1-50), then press MON.
Both MON and the frequency stored in the monitor memory are displayed.