Owner`s manual

28
To lock out a frequency during a each search mode, press L/OUT when the scanner
stops on the frequency. The scanner locks out the frequency, then continues
searching.
Notes:
l The scanner does not store locked-out frequencies during search.
l You can lock out as many as 200 frequencies. If you try to lock out more than
200 frequencies, L-FULL appears on the display.
Follow these steps to remove the lock-out from a frequency.
1. Press BAND or LIMIT or DIRECT/• to enter search operation.
2. Press L/O RVW. L-r appears on the display.
3. Repeatedly press /\ or \/ or turn TUNE knob until the frequency you want to remove
the lockout from is displayed.
4. Press L/OUT. L/O disappears from the display.
Reviewing Locked-Out Channels and Frequencies
You can review the channels or frequencies you locked out.
To review the channels you locked out, press MANUAL, then repeatedly press L/O
RVW. As you press L/O RVW, the scanner displays all locked-out channels.
To review the frequencies you locked out, press BAND or LIMIT or DIRECT/• to
enter search operation, then press L/O RVW. As you press /\ or \/ or turn TUNE knob,
the scanner displays all locked-out frequencies.
Deleting All Locked-Out Frequencies
You can delete all locked-out frequencies at one time.
1. Press BAND or LIMIT or DIRECT/• to enter search operation.
2. Press L/O RVW.
3. Press and hold down CL/DELAY, then press L/OUT.
PRIORITY