Owner`s manual

29
With the priority feature, you can scan through programmed channels and still not
miss an important or interesting call on a specific channel. You can program ten
priority channel.
Follow these steps to program the channels as the priority channel.
1. Press PGM.
2. To select the channel where you want to store the frequency, use the number keys
to enter the priority channel number (1-10), then press PRI.
3. Using the number keys, enter the frequency you want to store into that channel.
4. Press ENTER to store the frequency.
Notes:
l If you entered an invalid frequency in Step 3, the scanner beeps and displays
Error. Simply repeat Steps 3 and 4.
l Your scanner automatically rounds the entered frequency down to the closest
valid frequency.
l If you entered a frequency that is already stored in another (normal) channel, the
scanner beeps three times and displays the lowest channel number where the
frequency is already stored, and dUPL briefly flashes. If you want to store the
frequency anyway, press ENTER again.
5. Repeat Steps 2-4 to store more frequencies into priority channel (up to 10
channels).
To turn on the priority feature, press PRI. The scanner checks the priority channel
every 2 seconds. It stays on the channel if there is activity, and P with priority channel
number appears.
To turn off the priority feature, press PRI. PRI disappears from the display.
Locking Out the Priority Channel
You can lock out on or off priority channel.
1. Press PGM.
2. Press PRI.
3. Pressing PRI to select priority channel you locked out.
4. Press L/OUT.