Owner`s manual

3
S-Meter -- shows receiving signal strength.
Tape Remote Jack -- controls your tape recorder when the scanner receives the
signal.
Memory Backup -- keeps the channel frequencies stored in memory for about 3
months during a power loss.
Two Power Options -- let you power the scanner from standard AC power ( with the
supplied AC power cord), or your vehicle's battery (with an optional DC cigarette
lighter power cord).
Your AE100T scanner can receive all of these frequencies:
l 25-1300 MHz
SEARCH BANDS
Your scanner can tune over 115,000 different frequencies. Each of these frequencies
is contained within a group of frequencies called a band. The scanner uses
permanent memory locations called search bands (01-23) to group these bands. You
can search these bands to quickly find active frequencies you might want to store into
the scanner's channels.
The scanner has the following search bands
Band Search Range (MHz)
01 26-28
02 28-30
03 31-32
04 46-47
05 50-54
06 70-84
07 84-87.495
08 87.5-107.95
09 108-118
10 118-136.975
11 144-146
12 153-154
13 154-155
14 156-163
15 163-174
16 230-330
17 430-440
18 460-466
19 466-469
20 930-932
21 935-939