Owner`s manual

32
The distance over which it is possible for you to receive messages is restricted to
approximately 25 km. The manner in which the scanner has been positioned will also
be relevant here. It is preferable to position the scanner in such a way that the aerial
has a “clear view”. In order to be able to receive transmitters located at distances
beyond the aforementioned limit, the use of an outside aerial is recommended.
FREQUENCY GRID
The band division (frequency grid) – i.e. the distance between two frequencies lying
next to each other – is different for each frequency band.
Frequency Range Frequency Grid
25.000-87.495 MHz 5 kHz
87.500-107.950 MHz 50 kHz
108.000-136.975 MHz 25 kHz
137.000-143.995 MHz 5 kHz
144.000-146.000 MHz 12.5 kHz
146.005-224.995 MHz 5 kHz
225.000-1300.000 MHz 12.5 kHz
This division is called the frequency grid. Where the frequency keyed in does not fit
into this grid, the scanner will round down the frequency to the nearest value.
MAINTENANCE AND USE
The AE100T is a quality product and requires a minimum amount of maintenance.
Carefully read the following instructions:
. Do not expose the scanner to rain or moisture.
. When using normal batteries, always replace weak batteries in one batch, and only
replace them with new batteries. Where possible, use batteries which have a long life
span.
. Handle the scanner with care. Dropping it or subjecting it to rough treatment might
damage its electronics.
. Where necessary, clean the scanner with a damp cloth. Do not apply any cleaning
fluids or solutions to it.