Specifications

34
The World in Communication
PV 3S
”
Ord.-No.: 47830
PV 6S
” Ord.-No.: 47831
PV 12 S
” Ord.-No.: 47832
PV 18 S
” Ord.-No.: 47833
PV3S
”
Ord.-No.: 47834
Voltage converter 24 V DC - 12 V DC
These products offer a convenient way to operate mass produced 12Vdc
equipment such as cell phones, in car entertainment, professional com-
munication and telematics equipment, refrigerators, televisions etc. from
the 24Vdc mobile electrical systems found on diesel engined vehicles and
vessels.
A Comprehensive Range
There are 10 products in the range from 3A to 24A in isolated or common
earth configurations. They have been optimised for high volume 24Vdc
to 12Vdc applications such as on heavy goods vehicles, coaches, buses,
construction, forestry and agricultural vehicles, commercial and leisure
marine vessels.
Tamper Proof
There are no ventilation holes to permit stray objects, dust or water dro-
plets to enter the case. There are no external fuses to be tampered with.
Fuses will only blow if there is a fault so there is no need to make them
accessible.
All PowerVerters are enclosed in a rugged aluminium extrusion. The low
mass Surface Mount Technology components are also less prone to dama-
ge from vibration and shock, further increasing the reliability of the units.
3Amp units are excellent for charging mobile phones, while 6A units suit a
variety of mobile radio applications.
Galvanically isolated units are suitable for marine applications and come
complete with the green tamperproof label for petrochemical applica-
tions.
Fast Installation
All the units consume an off load current of less than 15mA, which is
probably less than the self discharge current of the vehicle’s battery. In
most cases this can be ignored, speeding the installation by removing the
need to fit a remote switch. All products fit onto a ‘Click ‘n’ Fit mounting
clip which is fixed in three points allowing it to be mounted on uneven
surfaces. It is easy to fit the clip into awkward places and then simply click
the unit into position. A red LED indicates when there is output from the
converter. This gives reassurance to the installation engineer and speeds
fault finding.
Easy 6 Step Installation Method
1. Find a convenient location away from sun and rain.
2. Using the mounting clip as a template, mark fixing positions.
3. Drill screw holes.
4. Fix bracket using screws provided.
5. Clip PowerVerter to mounting bracket.
6.Correctly connect to load.
Product benefi ts at a glance
ÿ Lifelong warranty
ÿ High performance
ÿ Low heat emissions
ÿ Dust and waterproof
ÿ Excellent installation possibilities
ÿ Compact, sealed cooling unit
Typical Applications
Installations of mobile and cellular radio communications equipment,
telemetry systems, refrigeration, televisions etc on trucks, buses, fore-
stry and off road vehicles as well as boats and yachts and a variety of
industrial applications. For a wider range of input and output voltages,
see the DD Series.
Alfatronic converters will built in following yachts
ÿ Princess ÿ Sunseaker ÿ Swan ÿ Cranchi
Technical datas
Input voltage range: 17 bis 32 V DC
Output voltage: 13.6 V DC
Operation temp.: -25˚ C to +80˚ C
Operation humidity: 95 % max., non condensing
Case work Aluminium and Polycarbonate. Dust water
and impact resistance to IP5-33
Connections: Five 6,3 mm push-on flat blade connectors (PV35 -A)
Power fl ow display: Red LED
Over current protection: Current sensing circuit
Overheat protection: Temperature sensing circuit
EN standard compliance: 2004/108/EC the general EMC directive
2006/96/EC the automotive directive
93/68/EEC the CE marking directive
VIDG5 AES for use on police and fi re vehicles
Certifi cations: CE- and e marked,
FCC class B
Voltage (intermittent): PV 3 S: 3/6 A
PV 6 S: 6/10 A
PV 12 S: 12/18 A
PV 18 S: 18/24 A
PV 24 S: 24/30 A
ECV 810
Voltage reducer with small dimensions.
Dimensions B/T/H: 120 x 165 x 40 mm
Output max. 15 Min.: 8 A
Continuous: 4 A
Short peak: 10 A
Overload protection: ja
Dimensions: 175 x 122 x 35 mm
Weight: 80 g
” Ord.-No.: 47751