Specifications

106 English
3. Turn SCROLL CONTROL and select from the following
modes:
• Close Call Off- turns off Close Call.
• Close Call DND - only checks for Close Call hits between
transmissions avoiding breaks in current transmissions.
• Close Call Pri (Priority) - checks for Close Call hits every 2
seconds, even during transmissions.
• Close Call Only - performs continuous Close Call checks
until you exit by pressing Scan or Srch/Svc.
• < Back - returns to previous menu.
4. Press Pgm/E to select and return to the Close Call menu.
If Close Call DND or Close Call Pri is selected, the Close Call icon will
display in Scan and Search modes.
Close Call Only Mode
In Close Call Only mode, the first line displays Close Call, CC Search
scrolls from the right to the left on the second line, and the Close Call
icon blinks in the display.
Enabled search bands appear on the lowest line. Disabled search bands
are not displayed.
• To turn Close Call bands on or off, use the number keys(1-6) on
the keypad.
One search band must always be enabled. If you turn off all search
bands, the scanner will display All Band Off!
• To hold on a specific band, press Hold. Turn SCROLL CONTROL
and select the band to monitor.
When the scanner finds a frequency, CC Found! appears in the display.
The scanner will also beep and/or flash the display (if enabled) in the
Close Call Alert option in the Close Call menu.
• Press any key (other than Hold) to view the displayed frequency.
While monitoring a Close Call transmission, the scanner displays Close
Call on first line and the monitoring frequency on the second line.