Specifications

68 English
Priority Scan with Do Not Disturb- lets you program one channel in
each bank (10 in all) and then have the scanner check each channel
every 2 seconds while it scans the banks so you don’t miss
transmissions on those channels. Do Not Disturb keeps the scanner
from interrupting transmissions during receiving.
Priority Plus Scan- you can set the scanner so it scans only the priority
channels.
Scan/Search Delay/Resume- controls whether the scanner pauses at
the end of the transmission to wait for a reply. You can set the Delay time
for each Channel, Close Call Search, Custom Search, and Service
search. You can also set a negative delay where the scanner stops on
transmissions for a set time then automatically resumes.
Custom Search- lets you program up to 10 Custom Search Ranges and
search any or all of these ranges.
Quick Search- allows you to enter a frequency and start searching up or
down from that frequency.
Turbo Search- increases the search speed from 100 to 300 steps per
second automatically for bands with 5 kHz steps.
Search Lockouts- you can lock up to 200 search frequencies:
100 temporary frequencies and 100 permanent frequencies in Custom
Search, Service Search, Close Call Search, or Quick Search Modes.
Frequency Step- Lets you select a frequency step (5, 6.25, 8.33,10,
12.5 or 20 kHz) each band coverage band.
Modulation- Lets you select a modulation (AM or FM) each band
coverage band.
Display Backlight-You can turn on/off the LCD backlight, set it operate
on squelch only, key press only, or both.
Signal Strength Meter- shows the signal strength for more powerful
transmissions.
Flexible Antenna with BNC Connector- provides adequate reception in
strong signal areas and is designed to help prevent antenna breakage.
You can also connect an external antenna for better reception.