Specifications

86 English
signal level required to open squelch. To listen to a weak or
distant station, decrease the Squelch setting.
4. Press SCROLL CONTROL to set the desired level and return
to the previous mode.
Setting the Backlight
Press to turn on the backlight on and off.
1. Press Func and to view the Display/Charge menu.
2. From this menu, scroll to Set Backlight from the submenus.
Press SCROLL CONTROL.
3. Scroll to select one of the following settings:
• Always Off - Backlight is always off.
• Always On – Backlight is always on.
• On with Squelch - Backlight is on while squelch is
open and until delay expires.
• On with Keypress - Backlight is on for 10 seconds
after any key is pressed.
• Keypress + Squelch – Both above-mentioned
"Squelch" and "Keypress."
• < Back - Return to previous menu.
4. Press Pgm/E (or press SCROLL CONTROL) to save and
return to the previous menu. (Default = Always Off )
5. Press .Clr to exit.
Notes: While being in the menu the backlight can be switched between
“Always On” and “Always Off” by pressing the button.
Adjusting the Contrast
This submenu of the Display/Charge menu controls the display’s
contrast (how light or dark it appears) for different viewing conditions.
There are 15 contrast settings. You see the contrast change as you scroll
through the settings.
1. To adjust the contrast, press Func then ; the Display/
Charge menu displays