Specifications
English 99
• You can turn search banks on/off by using 1-9 or 0. One search
bank must always be enabled. If you turn off all search banks, the
scanner will display Nothing to Srch.
• If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn SCROLL
CONTROL or press Srch/Svc.
Custom Search Receive/Hold Modes
To hold on a frequency, press Hold. To step through the frequencies,
turn SCROLL CONTROL in Hold mode. Press Hold to resume
searching.
While monitoring a transmission, the upper line displays the current
search bank name and the lower line displays the current frequency with
the direction indicator (↑or ↓)
The modulation, Priority mode icon (if priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled search banks.
The currently searched bank number flashes in Receive mode.
• To store a frequency, press Pgm/E; see Storing Found Search
Frequencies on page 102.
• To temporarily lock out a frequency, press L/O.
• To permanently lock out a frequency, press L/O twice quickly. See
also Search Options on page 100 for Delay, CTCSS/DCS settings
and locking out/reviewing/unlocking frequencies.
Quick Search Mode
Quick Search mode allows you to enter a frequency and start searching
up or down from that frequency from any Hold mode (except Close Call
Only).To start a Quick Search in Scan or Search mode, press Hold to
hold on any channel or frequency. Enter the new frequency (include a
decimal point so you don’t go to a channel) and press Hold again to set
the frequency.
At Quick Search, press Hold to start searching.